Haiti
Back to Tips Conventional battery The battery is located behind the cover on the right side. Maintenance Check battery electrolyte. The electrolyte level should be kept between the upper and lower level marks on the battery. If the electrolyte level is low, disconnect the negative battery cable and the positive terminals, remove the screw and …
back to tips Check that all tube connections are properly secured. To comply with emission standards, all Hero models now come with an air intake valve. The air intake valve supplies fresh air from the air filter to the exhaust to convert carbon monoxide to carbon dioxide. This reduces the CO% in the vehicle’s exhaust …
back to tips Make sure the rearview mirror provides a good rear view when you are sitting on the motorcycle.
Back to tips Check whether the headlight, stop light, low beam, indicators and horn work properly. Check strap and adjust if necessary. Check the smooth operation and maneuverability of the steering.
back to tips Check that all steering open and close positions are smooth. Wire Inspection: Check that the throttle grip rotation is smooth from the fully open position to the fully closed position. Check when the steering is fully to the left and to the right. Check the condition of the throttle cable to the …
back to tips Check the condition and slack of the chain and adjust it. Lubricate it if necessary. Drive chain service life depends on proper lubrication and adjustment. Poor maintenance can cause premature wear or damage to the drive chain and sprockets. The transmission chain must be checked and lubricated as part of the inspection …
back to tips Check for smooth operation and adjust clearance. Clutch adjustment may be required if the motorcycle stalls when shifting or tends to drift or if the clutch slips, causing acceleration to lag behind engine speed. A normal play/clearance is 10-20mm at the lever. To adjust clearance or free play, loosen the jam nut. …
back to tips Tires with tube The tires on your motorcycle are designed to match the performance capabilities of your motorcycle and provide the best combination of handling, braking, durability, and comfort. To safely operate the motorcycle, tires must be of the recommended type and size, in good condition, with proper tread, and properly inflated. …
Back to tips Front brake (drum type) Check its operation and adjust the clearances if necessary Drum Type Front Brake Adjustment Measure the distance the front brake lever (1) moves before the brake starts to grab, this clearance (2) should measure between 10-20mm to the tip of the brake lever. Make lash adjustments by turning …